Powder coating of aluminium profiles in Jordan, PVDF Coating & Wood Finish Coating in Jorda

Powder Coating

High Quality PVDF Coating

New Wood Finish Coating

Pre-Treatment

Pre-Treatment

All aluminum and steel extrusions are chemically pre-treated before coating is applied; this ensures the best surface preparation for enhanced coating adhesion and performance as well as long term corrosion resistance of the alloy.

For aluminum, alloys are chromium pre-treated according to the following specifications:

  1. Degreasing and Etching Tank: Etching rate > 1g/M².
  2. Water Rinsing Tank.
  3. Water Rinsing Tank.
  4. Chrome Tank: Conversion weight =0.6-1.2 g/M².
  5. Water Rinsing Tank.
  6. DI Water Rinsing Tank: the conductivity for this stage should be below 30 µS.

For Steel, alloys are pre-treated using degreasing using either iron or Zinc phosphate [For GI & CRS steel].

Related Powder Coating

Pre-Treatment

Pre-Treatment All aluminum and steel extrusions are chemically pre-treated be

Application

Application of Powder Coating   Powder is electro-statically sprayed

Oven Curing

Oven Curing Coatings are thermo-cured [oven-baked] as per the manufacturer&rs

Standard Powder Coatings

Classes of Standard Coating   Class 1 - Fine Polyester: This is a

Non-Standard Powder Coatings

Non-Standard Powder Coatings   In addition to the previously stated s

QUALICOAT Specifications for Powder Coatings

All powder coatings comply with the following specifications:   Co
Copyright 2020. Developed By istanbulIT.